• 검색 결과가 없습니다.

Supersonic Combustion Modeling and Simulation for Scramjets

N/A
N/A
Protected

Academic year: 2021

Share "Supersonic Combustion Modeling and Simulation for Scramjets"

Copied!
2
0
0

로드 중.... (전체 텍스트 보기)

전체 글

(1)

제 51회 KOSCO SYMPOSIUM 초록집(2015년도 추계학술대회) 23

Supersonic Combustion Modeling and Simulation for Scramjets

By

Foluso Ladeinde, Ph.D.

Chair, Department of Mechanical Engineering State University of New York (SUNY) Korea 119 Moonhwa-Ro, Yeonsu-Gu, Incheon 406-840

ABSTRACT

In this talk, we will present what we believe is the state-of-the-art of the numerical modeling and simulation of the combustion processes as they relate to typical scramjet engines. The free-stream Mach number is hypersonic, but the speed is not sufficiently decelerated at the inlet/isolator, as in ramjets, so that combustion takes place under supersonic conditions. This creates some difficulties for most turbulence-combustion models. We delve into the details of these problems, by discussing the software programs that have a long track record for scramjet combustion simulation; with a focus on the accuracy of the baseline numerical methods used, the turbulence modeling/simulation approach, the comparative fidelity of the

turbulence-combustion interaction models, ability to simulate

premixed/non-premixed/partially-premixed, quenching/re-ignition capabilities, the numerical spark-plug method, Damkholer number regimes supported, and the effects of variable Prandtl, Schmidt, and Lewis numbers. Validation results from high-speed and low-speed combustion applications will also be presented.

BIOGRAPHICAL SCKETCH

Dr. Ladeinde received the B. Sc. degree from the Faculty of Technology, University of Ibadan, with First Class Honours. He moved to the United States in 1981. Since then, he has earned several post-graduate degrees at Cornell University, Ithaca, New York, including his Ph.D. in Mechanical and Aerospace Engineering in 1988. He worked for several years as a

high-performance computing (HPC) software developer before joining the faculty of the State University of New York (Stony Brook University), Stony Brook in 1991 as an Assistant

Professor of Mechanical Engineering, where he has since been promoted and tenured. Dr. Ladeinde is a Visiting Professor and a Faculty Fellow of the United States Air Force and the

United States National Research Council, and a Visiting Scientist at the United States Department of Energy at the Brookhaven National Laboratory. He is a Fellow of the American Society of Mechanical Engineers (ASME) and a Life Member and an Associate Fellow of the American Institute of Aeronautics and Astronautics (AIAA). Dr. Ladeinde chaired the External Review Board of the NASA Center for Aerospace Research at North Carolina (NC) A&T

University in Greensboro, NC. Dr. Ladeinde founded TTC Technologies, Inc. in 1993, an

advanced engineering, education, and enterprise software company which has been a major

contractor for the United States Department of Defense for more than 17 years. Dr. Ladeinde has produced over 250 publications in internationally-recognized archival journals and

peer-reviewed conference proceedings. He has served as an Associate Editor (2009-2013) of the AIAA Journal, the flagship journal of the AIAA, and is currently an Associate Editor of The

ASCE Journal of Aerospace Engineering. Dr. Ladeinde’s 2010 paper on scramjet computer simulation won AIAA Best Paper Award. Dr. Ladeinde was a Visiting Scholar at Tsinghua

University in Beijing, China, during the summer of 2012, and has been a Weekly Columnist on

Information and Communication Technology for an international newspaper since 2011. Dr. Ladeinde is currently the Chair of the Department of Mechanical Engineering at the State University of New York in Songdo, South Korea.

(2)

제 51회 KOSCO SYMPOSIUM 초록집(2015년도 추계학술대회) 24

SHORT CV

B.Sc. (First Class) Faculty of Technology, University of Ibadan, Nigeria (Formerly College of the University of London)

M.S. (Cornell University, Ithaca, New York, USA), M. Eng. Mechanical Engineering (Cornell University), Ph.D. Mechanical and Aerospace Engineering (Cornell University)

Stony Brook University (New York) Professor in Mechanical Engineering for 24 Years (1991-Present)

Over 250 Publications in Archival Journals and Peer-Reviewed Conference Papers

Fellow, ASME; Associate Fellow and Life Member, AIAA; Life Member, APS; Member, SIAM

Associate Editor, ASCE Journal of Aerospace Engineering; Past Associate Editor, AIAA Journal; Weekly Columnist on Information and Communication Technology (ICT) Since 2011: Daily Trust Newspaper

Journals Published in: Physics of Fluids, Journal of Fluid Mechanics, AIAA Journal, ASME

Journal of Fluids Engineering, ASME Journal of Heat Transfer, International Journal for Numerical Methods in Fluids, Journal Crystal Growth, Journal of Computational Mechanics, Journal of Scientific Computing, Journal of Applied Mathematics Modelling

Chair, Department of Mechanical Engineering, State University of New York (SUNY) Korea

(Current)

2010 Paper on Scramjet Computer Simulation won AIAA Best Paper Award

Chair, External Review Board, National Aeronautics and Space Administration (NASA) Center

for Aerospace Research at North Carolina (NC) A&T University in Greensboro, NC.

Visiting Professor and a Faculty Fellow, United States Air Force and the United States National Research Council

Visiting Scientist, United States Department of Energy, Brookhaven National Laboratory

Visiting Scholar, Tsinghua University, Beijing, China United States Department of Defense ITAR Certification

(ASME=American Society of Mechanical Engineers, AIAA=American Institute of Aeronautics and Astronautics, ASCE=American Society of Civil Engineers, APS= American Physical Society, SIAM= (American) Society of Industrial and Applied Mathematics, ITAR=International Traffic in Arms Regulations)

참조

관련 문서

Calculations, creativity, designs and recommendations are only of value if they can be effectively communicated to fellow engineers, decision makers and the

• 미국의 ASHRAE(American Society of Heating Refrigerating and Air Conditioning Engineers, 미국 냉난방 공기조화 학회)에서 많은 연구

 Students needing additional information about grading policies and procedures should meet with their faculty advisor, Executive Director/Chairperson or a

It considers the energy use of the different components that are involved in the distribution and viewing of video content: data centres and content delivery networks

3) ACC/AHA/ESC 2006 Guidelines for the Management of Patients with Atrial Fibrillation: a report of the American College of Cardiology/American Heart

Basic aspects of AUTOSAR architecture and methodology Safety mechanisms supported by AUTOSAR.. Technical safety concepts supported by AUTOSAR Relationship to ISO

GDP impact of COVID-19 spread, public health response, and economic policies. Virus spread and public

After first field tests, we expect electric passenger drones or eVTOL aircraft (short for electric vertical take-off and landing) to start providing commercial mobility