• 검색 결과가 없습니다.

스프레이 코팅으로 제작된 유연 투명 히터용 ATO 나노입자-은 네트워크 하이브리드 투명 전극 연구

N/A
N/A
Protected

Academic year: 2021

Share "스프레이 코팅으로 제작된 유연 투명 히터용 ATO 나노입자-은 네트워크 하이브리드 투명 전극 연구"

Copied!
1
0
0

로드 중.... (전체 텍스트 보기)

전체 글

(1)

276 한국진공학회 TW-P032

스프레이 코팅으로 제작된 유연 투명 히터용 ATO 나노입자-은

네트워크 하이브리드 투명 전극 연구

김재경, 신해인, 김한기* 경희대학교 정보전자신소재공학과

본 연구에서는 차세대 유연 투명 히터 (Flexible and transparent heater) 제작을 위한 ATO 나노입자-은 네트워크 하이브리드 투명 전극의 특성을 연구하였다. 최적화된 은 네트워크 (Self-assembled Ag network) 투명 전극 상에 20-30 nm의 직경을 가지는 ATO (Sb-doped SnO2) 나노입자를 스프레이 방식으로 상압,

상온에서 코팅하여 인쇄형 ATO-은 네트워크 하이브리드 투명 전극을 구현하였다. 스프레이로 코팅된 투 명 ATO 나노 입자는 은 네트워크 전극의 빈 공간을 매워 줌으로써 은 네트워크 간의 연결성 및 표면 조도를 낮춰주어 유연 투명 히터 작동 시 전류의 집중 현상을 막아줄 수 있다. ATO-은 네트워크 하이브 리드 투명 전극의 최적화를 위해 스프레이 횟수에 따른 하이브리드 투명 전극의 전기적, 광학적, 표면 특 성을 분석하였으며, 최적의 조건에서 14 Ohm/square의 면저항과 66%의 투과도를 가지는 하이브리드 투 명 전극을 구현하였다. 또한 FESEM 분석을 통해 ATO-은 네트워크 하이브리드 전극의 표면 및 계면 구 조를 연구하고 ATO 코팅이 은 네트워크 전극의 특성에 미치는 영향을 규명하였다. 최적화된 ATO-은 네 트워크 하이브리드 투명 전극을 이용하여 유연 투명 히터를 제작하고 전압에 따른 히터의 온도의 변화를 측정하여 차세대 유연 투명 히터용 투명 전극으로 인쇄기반 ATO-은 네트워크 하이브리드 투명 전극의 가능성을 확인하였다. Keywords: 차세대 유연 투명 히터, ATO 나노입자-은 네트워크 하이브리드, 스프레이 방식 TW-P033

Fabrication of NiS Thin Films as Counter Electrodes for

Dye-Sensitized Solar Cells using Atomic Layer Deposition

정진원, 김은택, 박수용, 성명모 한양대학교

Dye-sensitized solar cells (DSCs) are promising candidates for light-to-energy conversion devices due to their low-cost, easy fabrication and relative high conversion efficiency. An important component of DSCs is counter electrode (CE) collect electrons from external circuit and reduct I3- to I-. The conventional CEs are thermally decomposed Pt on fluorine-doped tin oxide (FTO) glass substrates, which have shown excellent performance and stability. However, Pt is not suitable in terms of cost effect. In this report, we demonstrated that nickel sulfide thin films by atomic layer deposition (ALD)-using Nickel(1-dimethylamino-2-methyl-2-butanolate)2 and hydrogen sulfide at low temperatures of 90-200°C—could be good CEs in DSCs. Notably, ALD allows the thin films to grow with good reproducibility, precise thickness control and excellent conformality at the angstrom or monolayer level. The nickel sulfide films were characterized using X-ray photoelectron spectroscopy, scanning electron microscopy, X-ray diffraction, hall measurements and cyclic voltammetry. The ALD grown nickel sulfide thin films showed high catalytic activity for the reduction of I3- to I- in DSC. The DSCs with the ALD-grown nickel sulfide thin films as CEs showed the solar cell efficiency of 7.12% which is comparable to that of the DSC with conventional Pt coated counter electrode (7.63%).

참조

관련 문서

칼라코드를 사용하기 위해서는 스마트 폰이 필요합니다.. 많은

로봇공학자는 크게 로봇연구원과 로봇조작원으로 나눌 수 있습니다.. 직업훈련교육과정에 유통관리사 과

핵 심역량의 융통합(convergence)과 동일하지만 여기서는 수업방법론의 의미가 강조되고 있다...

오래전부터 산화물 재료에 대한 연구가 이루어져 왔지만 미래 대화면,고화질의 디스 플레이 및 태양전지에 적용 할 수 있는 투명 전극,디스플레이용 박막 트랜지스터,

26 은 태양열 하이브리드 이산화탄소 열펌프 시스템과 태양열- 지열 하이브 리드 이산화탄소 열펌프 시스템의 열펌프 작동온도,열펌프 의존율,열펌프

본 연구의 목적은 국내화가 필요한 하이브리드 대형 특수 기어의 가공공정을 개 발하고 CATIA 프로그램을 통해 하이브리드 대형 특수 기어의 3D Modeling 을

증강현실 (Augmented Reality, AR)은 현실 세계에 3 차원의 가상 이미지를 포개 하나의 영상으로 보여주 는 기술을 말한다.. 새로운 수트를 만들 때도 투명 디스플레이

- "This work was supported by the Korea Foundation for the Advancement of Science and Creativity(KOFAC) grant funded by the Korea government(MOE)"...