• 검색 결과가 없습니다.

유한 요소법을 이용한 수종 심미 수복물의 응력 분석

N/A
N/A
Protected

Academic year: 2021

Share "유한 요소법을 이용한 수종 심미 수복물의 응력 분석"

Copied!
17
0
0

로드 중.... (전체 텍스트 보기)

전체 글

Loading

수치

Fig. 1. Cross-sectional view of anterior esthetic restoration and abutment with varous design.
Fig. 2. Finite element mesh layout and loads applied.
Table 3. Maximum stresses under the load P 1 (kg/㎣)
Table 4. Maximum stresses under the load P 2 (kg/㎣)
+2

참조

관련 문서

It was suspected about the assassinating of Crown Prince Kanaung that he was assassinated in 1866 by Prince Myingun. Myanmar Kingdom nearly outreached the way into

Therefore depending on the size of the fracture in the veneering porcelain, intraoral repair methods using surface treatment and composite resins may

OM images of porcelain fused to Ni-Cr alloy composite extracted from a dental patient after about four years usage (shown only metal portion which was

In this study, 3D PCL scaffolds were fabricated by using notch type nozzle via fused deposition modeling (FDM) to improve the cell adhesion and

A clinical study of the efficacy of gold-tite square abutment screws in cement-retained implant restorations.. An abutment screw loosening study of a Diamond

3. In case of gold alloy inner crown, gold alloy outer crown was better than GES outer crown in retentive force. However, retentive force of gold alloy outer

In von Mises stresses of abutment, loading to the abutment was concentrated mainly by the morse taper in the one-piece abutment but was concentrated by

However, in respect to relation conflict stress and response in tree test, the taller trees, the thicker the stalks and the larger the crown, the