• 검색 결과가 없습니다.

Fabrication of Organic Photovoltaics Using Transparent Conductive Films Based on Graphene and Metal Grid

N/A
N/A
Protected

Academic year: 2022

Share "Fabrication of Organic Photovoltaics Using Transparent Conductive Films Based on Graphene and Metal Grid"

Copied!
1
0
0

로드 중.... (전체 텍스트 보기)

전체 글

(1)

제 46 회 동계학술대회 441 E-001

Fabrication of Organic Photovoltaics Using Transparent Conductive Films Based on Graphene and Metal Grid

Sung Man Kim1, Bright Walker2, Jung Hwa Seo3, and Seong Jun Kang1

1Kyung Hee University, 2UNIST, 3Dong-A University

The characteristics of hybrid conductive films based on multilayer graphene and silver grid have been investigated for the high-performance and flexible organic solar cells. The hybrid conductive films have been prepared on glass and polyethylene terephthalate (PET) substrates using conventional photolithography process and transfer process of graphene. The optical and electrical properties of prepared conductive films show transmittance of 87% at 550nm and sheet resistance of 28 Ω/square. The electromechanical properties were also investigated in detail to confirm the flexibility of the hybrid films. OSCs have been fabricated on the hybrid conductive films based on graphene and silver grid on glass substrate. The power conversion efficiency of 2.38%, a fill factor of 51%, an open circuit voltage of 0.58V and a short circuit current of 8.05 mA/cm2 were obtained from the device on glass substrate. The PCE was enhanced 11%

compared with OSCs on the MLG films without silver grid.

Keywords: graphene, silver grid, organic solar cells

Fig. 1.

Fig. 2.

Fig. 3.

Fig. 4.

Table 1.

Table 2.

참조

관련 문서

We used etching pattern geometry with soft core blanket roll for printing of ultra fine line below the 10um.Using this technique we obtained flexible metal grid mesh

Abstract Transparent organic-inorganic hybrid hard coating films were prepared by the addition of SiO 2 or ZrO 2 , as an inorganic filler to improve the hardness property,

Electrical and Optical Properties of Sb-Doped SnO 2 Transparent Conductive Films Fabricated by Using Electrospinning.. Ha-Rim An, Bon-Ryul Koo, Hyo-Jin Ahn † and

Adachi, Effect of Solvent on Fabrication of Active Layers in Organic Solar Cells Based on Poly (3-hexylthiophene) and Fullerene Derivatives, Solar Energy Materials and Solar Cells,

appropriate organic etchant for producing an excellent etch profiles and controllable etch rates in patterning low temperature (RT) sputter-deposited ZnO-based TCO films on