516 Polymer Science and Technology Vol. 13, No. 4, August 2002 2002. 8. 23 현재
TC/SC ISO 제 목 투표마감일
TC61(Plastics) NWIP M 5206 Plastics - Guide for the production of recycled plastics materials
2002.09.18 ISO 178 /DAM 1 Plastics - Determination of flexural properties -
Amendment 1 : Precision statement
2002.10.16
ISO 6721-4 /DAM 1 Plastics - Determination of dynamical mechanical properties - Part 4 : Tensile vibration
2002.10.16
DIS 16012.2 Plastics - Determination of the linear dimensions of test specimens
2002.10.08 FDIS 17281 Plastics - Determination of fracture toughness(G1C
and K1C) at moderately high loading rates(1m/s)
2002.09.11
DIS 306 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
2002.09.04 TC61/SC2(Plastics/Mechanic
al properties)
DIS 11403-2 Plastics - Acquisition and presentation of compara- ble multipoint data - Part 2 : Thermal and processing properties
2002.08.28
TC61/SC5(Plastics/Physical -chemical properties)
DIS 1133 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
2002.09.04
TC61/SC6(Plastics/Ageing, chemical and environmental re- sistance)
DIS 15314 Plastics - Methods for marine expose 2002.09.18
TC61/SC9(plastics/ ISO 294-3/DAmd 1.2 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3 : Small plates
2002.08.27
ISO/FDIS 15106-1 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 1 : Humidity detection sensor method
ISO/FDIS 15106-2 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 2 : Infrared detection sensor method
TC61/SC11 (Plastics/Products)
ISO/FDIS 15106-3 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 3 : Electrolytic detection sensor method
2002.10.22
TC61/SC12(Plastics/Thermo setting materials)
ISO/DIS 8987 Plastics - Phenolic resins - Determination of reac- tivity on a B-transformation test plate
2003.01.15
ISO/DIS 1268-11 Fibre reinforced plastics - Methods of producing test plates - Part 11 : Injection moulding of BMC and other long fibre moulding compounds - Small plates
2002.10.16
DIS 1268-10 Fibre reinforced plastics - Methods of producing test plates - Part 10 : Injection moulding of BMC and other
2002.09.25 TC61/13(Plastics/ Compos-
ites and reinforcement fibres)
CD 10618 Carbon fibre - Determination of tensile properties of resin-impregnated yarn
2002.09.25
DIS 7682 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Acry- lonitrile-butadiene-styrene(ABS)
2002.09.04 TC138/SC1(Plastics pipes and
fittings for soil, waste and dr- ainage (including land drain-
age)) DIS 7671 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Poly- propylene (PP)
2002.09.04
TC138/SC2(Plastics pipes and fittings for water supplies)
DIS 8770 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Poly- ethylene (PE)
2002.09.04
투표진행중인 ISO 문건
고분자과학과 기술 제 13 권 4 호 2002년 8월 517 ISO/FDIS 14531-1 Plastics pipes and fittings - Crosslinked polyethyl-
ene(PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 1 : Pipes
2002.10.08
CD 6993-1 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 1 : Pipes at a maximum operating pressure of 1 bar (100 kPa)
2002.09.06
CD 6993-2 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 2 : Fittings at a maximum operating pressure of 200 mbar (20 kPa)
2002.09.06
CD 6993-3 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 3 : Fittings at a maximum operating pressure of 1 bar (100 kPa)
2002.09.06
CD 6993-4 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 4 : Code of practice for design, handling and installation
2002.09.06
DIS 19480 Thermoplastics pipes and fittings for the supply of gaseous fuels - training and assessment of fu- sion-machine operators
2003.01.08
CD 18226 Reinforced thermoplastics piping systems for gase- ous fuels
2002.09.06 CD 14531-3 Plastics pipes and fittings - Crosslinked polyethylene
(PE-X) pipe systems for the transport of gaseous fuels - Metric series - Specification - Part 3 : Fittings for mechanical jointing (including PE-X/
metal transitions)
2002.09.06
CD 14531-4 Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the transport of gaseous fuels - Metric series - Specification - Part 3 : System design and installation guidelines
2002.09.06 TC 138/SC 4(Plastics pipes
and fittings for the supply of gaseous fuels)
CD 18226 Reinforced thermoplastics piping systems for gase- ous fuels
2002.09.06
DIS 9311-3 Adhesives for thermoplastic piping systems - Part 3 : Test method for the determination of resistance to internal pressure
2002.09.18
DIS 19220 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Sty- rene copolymer blends (SAN＋PVC)
2002.09.11 TC 138/SC 5(General proper-
ties of pipes, fittings and valves of plastic materials and their accessories - Test methods
and basic specifications) DIS 580.2 Plastics piping and ducting systems - Injection- moulded thermoplastics fitting - Methods for visually assessing the effects of heating
2002.08.28
* ISO 규격제정 기술위원회에서 최근에 회람 또는 투표 중인 규격안들입니다. 규격안에 대해 의견을 주시거나 기타 관심사항은 아래 주소로 연락바랍니다.
산업자원부 기술표준원 고분자섬유과 플라스틱실
Phone : 02-509-7269, FAX : 02-507-1922, e-mail : [email protected]
