• 검색 결과가 없습니다.

Effects of Ti addition on cavitation characteristics of stainless steels in natural seawater

N/A
N/A
Protected

Academic year: 2021

Share "Effects of Ti addition on cavitation characteristics of stainless steels in natural seawater"

Copied!
1
0
0

로드 중.... (전체 텍스트 보기)

전체 글

(1)

2012년도 한국마린엔지니어링학회 공동학술대회 논문집

천연해수 내 스테인리스강의 캐비테이션 특성에 미치는 Ti첨가의 영향

김성종+

․한민수1․현광용2․이정형3

Effects of Ti addition on cavitation characteristics of stainless steels in natural seawater

Seong-Jong Kim+, Min-Su Han1 · Koang-Yong Hyun2· Jung-Hyung Lee3

캐비테이션 침식(Cavitation erosion)은 주로 선박의 프로펠러와 같이 유체 내에서 고속으로 회전하는 재료에 손상 을 일으키며, 선박의 추진효율을 저하시키고 Rudder등의 선미구조물에 충격을 주게 된다. 캐비테이션 현상은 빠른 속 도로 유체가 운동할 때 유체의 압력이 증기압 이하로 낮아져서 유체 내에 기포(cavity)가 발생하게 되며, 수많은 기포 가 파괴되면서 심한 충격을 유발한다. 특히, 해수와 같은 부식 환경과 캐비테이션 현상이 발생한 경우 재료의 손상을 가속화시킨다. 스테인리스강의 경우 우수한 기계적 성질과 내식성으로 인해 선박의 프로펠러, 펌프의 임펠러, 버터플 라이 밸브 등에 폭넓게 사용이 되고 있지만, 사용조건에 따른 내캐비테이션 강종 개발이 요구되고 있는 실정이다. 따라서, 본 연구에서는 오스테나이트계 스테인리스강에 케비테이션의 저항성에 영향을 미치는 것으로 알려진 카바이 드를 형성시키기 위해 Mo를 합금화하고, 입계에 TiC를 형성시키는 합금 원소인 Ti의 농도변수에 따른 시험편을 제작하 여, Ti 함량에 따른 스테인리스강의 해수 환경하에서의 캐비테이션 특성을 평가하였다.

+ 김성종(목포해양대학교 기관공학과),E-mail:[email protected], Tel: 061)240-7410 1,2,3 목포해양대학교 기관공학과

참조

관련 문서

1 John Owen, Justification by Faith Alone, in The Works of John Owen, ed. John Bolt, trans. Scott Clark, "Do This and Live: Christ's Active Obedience as the

This study investigated the effects of process variables on the residual stress distributions of induction heating bended austenitic stainless steel (316 series)

Such characteristics influenced the views on colors and each period showed the following views on colors: In Three Kingdoms of Korea, natural and light

Despite this trend in addition to numerous studies examining the crime prevention effects of CCTV, a research that studies the difference between the effects

The effects of recycling on the tensile bond strength of new and clinically used stainless steel orthodontic brackets: an in vitro study. Material testing of

F F Fi i ig g g.. C) 처리한 시편의 미세조직을 관찰한 것이다.. 950× 10 -6 ㎂/㎠ 이므로 Cp-Ti 의 시편에서 부식성이 다소 양호하게 나타났다.이러한 부식특성의 차이는 Cp-Ti

Objectives : The purpose of this study was to investigate the effects of general characteristics, health characteristics, mental health characteristics, suicidal

In terms of the mould design, the effects of runner system design and the mould temperature on filling characteristics, the weldline formation, the