Hardness of AlTiN/TiAlN multilayer coatings deposited by Cathodic Vacuum Arc Deposition
1
0
0
전체 글
관련 문서
As a result of the thermal conduction analysis, a cooling zone is formed on the surface of the welding metal along the arc by a cooling medium, compared
From the results of Micro Vickers hardness test, Ti- 40Hf alloy showed significantly increasing of hardness and tensile strength than others in the case of
In this paper, iCVD (Initiated Chemical Vapor Deposition), which can deposition in low temperature and low vacuum environments and has high step coverage, is used as a
36 SEM Microphotographs of the Electrical Electrodes of the Burn Resistor PCB ((a): Before Vibration and Thermal Vacuum Test, (b): After Vibration and Thermal
시편-노즐 거리가 작을수록 더블 아크 발생률이 증가했으며 이로 인해 시편 상단면의 홀 면적과 더블 아크 향부의 면적이 증가. 시편 두께가 두꺼울수록 더블 아크
Expanded foams, gas-filled powders, fibrous materials, vacuum alone, evacuated powders and fibrous materials, opacified powders 그리고 multilayer insulations 등이
The mechanical properties of the Ir-based films by the change of the alloy element content show that the hardness value is decreased with Re contents
3.1 Comparison of ISO Quality levels and weldability of laser-arc hybrid welded joints by wire for heat resistant steel varying travel speed in 10kW · ·
