• 검색 결과가 없습니다.

Erratum to : Analysis on Current Characteristics According to Injection Method and Driving Waveform in Electrophoretic-Type E-Paper Display

N/A
N/A
Protected

Academic year: 2021

Share "Erratum to : Analysis on Current Characteristics According to Injection Method and Driving Waveform in Electrophoretic-Type E-Paper Display"

Copied!
1
0
0

로드 중.... (전체 텍스트 보기)

전체 글

(1)

Erratum to : 전기영동형 전자종이 디스플레이에서 전자잉크의 주입 방법 및 구동파형에 따른 전류 특성 분석

이주원, 김영조

청운대학교 전자공학과

Erratum to : Analysis on Current Characteristics According to Injection Method and Driving Waveform in Electrophoretic-Type E-Paper Display

Joo-Won Lee and Young-Cho Kim

Department of Electronic Engineering, Chungwoon University, Incheon 22100, Korea

ERRATUM

 

“전기영동형 전자종이 디스플레이에서 전자잉크의 주입 방법 및 구동파형에 따른 전류 특성 분석, 전기전자재 료학회논문지, 33(5), 386-392, https://doi.org/10.4313/JKEM.2020.33.5.386”의 감사의 글을 저자의 요청으 로 아래와 같이 수정합니다.

- 수정 전 : 본 연구는 2020년도 청운대학교 학술연구조성비 및 2017년도 정부(과학기술정보통신부)의 재원 으로 한국연구재단의 지원을 받아 수행된 연구임(No.2017R1A2B1010310).

- 수정 후 : (삭제)

✉ Young-cho Kim; [email protected] Copyright ©2020 KIEEME. All rights reserved.

This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Erratum 521

J. Korean Inst. Electr. Electron. Mater. Eng.

Vol. 33, No. 6, p. 521 November 2020 DOI: https://doi.org/10.4313/JKEM.2020.33.6.521 ISSN 1226-7945(Print), 2288-3258(Online)

참조

관련 문서

In terms of the mould design, the effects of runner system design and the mould temperature on filling characteristics, the weldline formation, the

Based on the introduction of industrial wastewater TOC effluent standard, the distribution characteristics of organic matter according to the type of business

This paper aims to compare and analyze the appreciation area in highschool music textbooks and to study on the teaching method.. The Seventh Curriculum and

According to the analysis results, the characteristics obtainable by the human model based motion capture system are the Euler angle, 3 dimensional location

In this paper, it is implemented the image retrieval method based on interest point of the object by using the histogram of feature vectors to be rearranged.. Following steps

This article, in terms of retrospective evaluation, intended to present a suitable alternative for the present with the normative analysis, the comparative

Therefore, in order to make advanced composite pallet on digital display production line, this study will analyze stress of the composite pallet according to the

33) UNFCCC, Draft text on Matters relating to Article 6 of the Paris Agreement : Work programme under the framework for non-market approaches referred to in Article 6, paragraph