• 검색 결과가 없습니다.

IEG 환경지질연구정보센터

N/A
N/A
Protected

Academic year: 2021

Share "IEG 환경지질연구정보센터"

Copied!
1
0
0

로드 중.... (전체 텍스트 보기)

전체 글

(1)

Proceedings of the Annual Joint Conference, Petrological Society of Korea and Mineralogical Society of Korea

May 29~30, 2008, Busan, Korea

한국암석학회․한국광물학회 2008년 공동학술발표회 논문집 - 201 -

Synthesis ZSM-5 from siliceous mudstone

*Huynh Thanh Tuan1, In-Kook Bae2, young-Nam Jang2, Young-Bae Chai2, Soo-Chun Chae2, Dong-Soo Suhr1

1 Chungnam National University, Faculty of Materials Science.

2 Korea Institute of Geoscience and Mineral Resource (KIGAM)

ZSM-5 was successfully synthesized from natural starting materials, siliceous mudstone which major compositions are 85.85 wt.% SiO2 and 6.99 wt.% of Al2O3, by hydrothermal method. Siliceous mudstone, which having averageparticle size of 2 m, was used to synthesize ZSM-5. The ZSM-5 crystallization was strongly affected by molar ratio between SiO2 and Al2O3, which was controlled from 25 to 35.4 by addition of different amounts of sodium silicate. The syntheses were conducted with variations of the reaction temperature from 130 to200oC and the reaction time from 4 to 40 hours.

Tetrapropyl ammonium bromide was used as template. ZSM-5 products were analyzed by XRD, SEM and BET specific surface area measurements. The experiments were carried out in the optimum synthetic condition at molar ratio 3.3Na2O_31SiO2_Al2O3_1040H2O_1.2(TPABr) and 170oC of reaction temperature. The analytical results showed ZSM-5 product has 324 m2/g specific surface area and sphere-type morphologies.

참조

관련 문서

Microstructure of coated layers of (a) hydroxyapatite, (b) 7H3TCP and (c) 7H3W on zirconia substrate and their element composition on coated surface... XRD analysis

Surface morphology and chemical composition of samples were characterized by field emission scanning electron microscopy (FE-SEM), contact angle measurement and

First, the general characteristics of the two groups were analyzed by frequency analysis and correlation analysis, which is technical statistics, and the

XRD analysis, surface roughness test, FE-SEM imaging, and biaxial flexural strength test were performed... Results: In the result of XRD analysis, an phase change occurred

The characteristics of typhoons were examined via synoptic analysis and track examination, and the damage types and scales were analyzed to contribute to

 Heat sink, provides large surface area to dissipate heat from

The structure and film optical properties were investigated by X-ray diffraction(XRD), the particle size and thickness were investigated by scanning

Photoluminescence properties and surface morphologies of porous silicon were investigated by controlling of etching times and applied current densities..