• 검색 결과가 없습니다.

Role of a ZnO buffer layer for the formation of epitaxial NiO films

N/A
N/A
Protected

Academic year: 2021

Share "Role of a ZnO buffer layer for the formation of epitaxial NiO films"

Copied!
1
0
0

로드 중.... (전체 텍스트 보기)

전체 글

(1)

85

A-15

Role of a ZnO buffer layer for the formation of epitaxial NiO films

권용현†, 천성현, 이주호*, 이정용*, 조형균

성균관대학교 신소재공학부; *KAIST 신소재공학과

(fokyh@skku.edu†)

NiO는 니켈 공공과 침입형 산소 이온에 의한 비화학적양론 특성 때문에 자발적으로 p-형 반도체 특성을 나타내는 것으

로 알려져 있다. NiO는 3.7 eV 의 넓은 밴드갭을 가지고 있어 투명소자를 위한 hole injection layer 나 hole transport layer 로 사용하기 위한 연구가 많이 이루어지고 있다. 또한, 안정적인 p-형 반도체 특성은 n-형 산화물 반도체와의 접합을 통해 복합소자의 구현이 용이하기 때문에, ZnO 등과의 접합을 통한 소자 구현이 가능하다.[1] 하지만, 기존의 많은 연구에서는 내부의 결함이 많이 존재하는 다결정 박막을 사용하였기 때문에, 전하의 이동에 제한이 발생해, 충분한 소자 특성을 나타 내지 못하였다. 최근 Dutta의 연구에 의하면, 결정질 사파이어 기판위에 박막을 성장할 경우 [111] 방향으로 우선 배향성을 가진 NiO 박막을 얻을 수 있다고 알려져 있다.[2] 본 실험에서는 NiO 박막을 이용한 PN 접합소자 구현을 위해 사파이어 위에 p-NiO 박막을 에피택셜하게 성장한 후 구조적 특성을 분석하였으며, n-ZnO 박막을 그 위에 성장하여 소자를 제작하 였다. 그 결과 ZnO 또한 에피택셜한 성장을 하는 것을 확인할 수 있었다. 성장순서에 따른 PN 접합구조 특성을 확인하기 위해 사파이어 위에 ZnO 를 성장시킨 후 NiO 를 성장시킨 결과 NiO 박막의 우선성장 방향이 [100]으로 변하는 것을 확인 할 수 있었다.

References

[1] H. Kim, C. Gilmore, A. Pique, J. Horwitz, H. Mattoussi, H. Murata, Z. Kafafi, D. Chrisey, J. Appl. Phys., 86 (1999) 6451. [2] T. Dutta, P. Gupta, A. Gupta, J. Narayan, Journal of Applied Physics, 108 (2010) 083715-083715-083717.

참조

관련 문서

표면 불순물층 중부인 dark gray 상 (Zr-rich zone) 의 안쪽 부위까지는 Si 침투가 이뤄지지 않음. • Uranium은 중부 dark gray

• Mechanism of boundary layer growth on a smooth flat plate - Boundary layer flow: laminar → transition → turbulent - Velocity of the fluid particle at the body wall is

• Inertial sub-layer, viscosity plays a minor role. • Main turbulent

19 Movie: Boundary layer concept (Velocity profile near plate, Boundary layer thickness on moving plate) ./mmfm_movies/1_02035_04.mov ./mmfm_movies/2_02005.mov. 20 Movie:

Decomposition (MOD) process, and then the zinc oxide nanorods on ZnO seed layer were grown by hydrothermal process from 0.3 M at pH 7, 80 ℃ , 1 h. Single phase zinc oxide

• Prandtl (1904) suggested the boundary layer concept in which viscous effects are important only in the boundary layer regions, and outside boundary layer, the fluid acts as

We report the fabrication of nano-porous ZnO nanowires (NWs) using a process combining laser-induced hydrothermal growth followed by a post annealing process.. Initially,

□ Each host and router on a subnet needs a data link layer address to specify its address on the subnet. § This address appears in the data link layer frame sent on