Effects of intake flows on spray structure of a high pressure multi-hole injector in a second generation direct-injection gasoline engine
Study on Low Pressure Loop EGR System for Heavy-duty Diesel Engine to Meet EURO-5 NOx Regulation
[기획특집 - 반도체 기술] 산화물 박막트랜지스터 기술 현황 및 전망
Deep neural network based prediction of burst parameters for Zircaloy-4 fuel cladding during loss-of-coolant accident
Role of residual ferrites on crevice SCC of austenitic stainless steels in PWR water with high-dissolved oxygen
Equilibrium calculations for HyBRID decontamination of magnetite: Effect of raw amount of CuSO4 on Cu2O formation
Design and fabrication of an optimized Rogowski coil for plasma current sensing and the operation confidence of Alvand tokamak
Construction Safety Management
A Study on the Position Control of a Motor Cylinder with Nonlineal Friction
457.308 Construction Methods and Equipment Department of Civil and Environmental Engineering
Tension Modeling and Looper-Tension ILQ Servo Control of Hot Strip Finishing Mills
A Study on the Development of Al Alloy for the Vehicle Connecting Rod Using Hot Forging
Disturbance observer based adaptive sliding mode control for power tracking of PWRs
Evaluation of the Utility of Self Produced MRI Radiofrequency Shielding Material
Pressure drop in packed beds with horizontally or vertically stratified structure
Modified mixing coefficient for the crossflow between sub-channels in a 5 × 5 rod bundle geometry
Application of Thin-Walled Tubes Using Guided Wave
2. 고리 1 내부구조물 채취 계획 3. 연구 수행 방안
A Study on the Shape Optimization Design of the Knuckle by the Finite Element Analysis
Effect of Subzero Treatment on the Microstructure and Mechanical Properties of Austempered Ductile Cast Iron
Analysis of Exciting Forces for In-Line 4 Cylinders Engine
A cavitation performance prediction method for pumps PART1-Proposal and feasibility
Facility to study neutronic properties of a hybrid thorium reactor with a source of thermonuclear neutrons based on a magnetic trap
A Study on Network Interface Scheme of Heterogeneous Systems for SEM's Smart Factory Preliminary Preparation
