502
Erratum - Influence of various metal oxides on mechanical and physical properties of heat-cured polymethyl methacrylate denture base resins
Neset Volkan Asar1,3, DDS, PhD, Hamdi Albayrak2, DDS, PhD, Turan Korkmaz3, DDS, PhD, Ilser Turkyilmaz4, DDS, PhD
1Implant Clinic, Department of Comprehensive Dentistry, Dental School, University of Texas Health Science Center at San Antonio, Texas, USA
2Private Practice, Sakarya, Turkey
3Department of Prosthodontics, Dental School, Gazi University, Ankara, Turkey
4Implant Clinic, Department of Comprehensive Dentistry, University of Texas Health Science Center at San Antonio, Texas, USA
[J Adv Prosthodont 2013;5:241-7]
DOI of original article: 10.4047/jap.2013.5.3.241
The article ‘Influence of various metal oxides on mechanical and physical properties of heat-cured polymethyl methacrylate denture base resins’ authored by Neset Volkan Asar, Hamdi Albayrak, Turan Korkmaz, Ilser Turkyilmaz, published in August issue [Vol 5, No 3] of The Journal of Advanced Prosthodontics (2013), has an erratum. The words “B” and “C” were mistakenly arranged in Fig. 1. It should be changed with each other. The Journal of Advanced Prosthodontics apologizes to the readers for this error.
http://dx.doi.org/10.4047/jap.2013.5.4.502
http://jap.or.kr J Adv Prosthodont 2013;5:502
Fig. 1. Three types of acrylic resin specimens used in this study. (A) Test specimen for fracture toughness, (B) Test specimen for impact strength, (C) Test specimen for water sorption and solubility.
A B
C
