• 검색 결과가 없습니다.

A Study of laminated split leather Process using Thermally Sensitive Color-change(Microcapsule)

N/A
N/A
Protected

Academic year: 2021

Share "A Study of laminated split leather Process using Thermally Sensitive Color-change(Microcapsule)"

Copied!
1
0
0

로드 중.... (전체 텍스트 보기)

전체 글

(1)

PC-18

www.ksdf.or.kr

100

감온

Microcapsule

염료를 이용한

Laminated Split Leather

공정 연구

Film

이상헌†, 이상철 신은철 김원주, ,

한국신발 피혁연구소 천연소재연구팀·

A Study of laminated split leather Process using Thermally

Sensitive Color-change(Microcapsule)

Sang-Heon Lee†, Sang-Chul Lee, Eun-Chul Shin, Won-Ju Kim

Natural Material Research Team, Korea Institute of Footwear and Leather Technology [email protected], 051-605-3371

Abstract

상품성이 떨어지는 B, C급의 Split leather에 감온 기능성 Film을 부착하고, Film 부착 공정에서 유 성 접착제의 사용을 배제한 친환경적인 고급 Laminated split leather를 제조 하였다 온도에 따라 색이. 변하는 감온 Microcapsule 염료를 이용한 Film의 색도, Touch감과 신장 등의 최적조건을 찾는 실험으 로서 수성 PU 접착제, Wetting&levelling agent, 증점제 감온, microcapsule 염료를 상온에서 혼합하여

을 제조한 다음 수성 접착제와 용 경화제를 혼합한 접착제를 이용하여 가죽에 부착 Film PU Urethane 시켰다 감온. microcapsule자체의 색도가 떨어지므로 두 번 코팅하는 방법으로 이 문제점을 보완 하였 으며 감온, microcapsule 염료의 함량에 따른 물성 평가를 하였고 감온, microcapsule 염료를 이용한 공정을 확립 하였다 Film .

참고문헌

1. K. Hong and S. Park, Materials Chemistry and Physics, 58 (1999) 128-131

2. Hae-In Kim, Soo-Min Park, Preparation and Properties of Microcapsule with EVA Core-PU Shell Structure, JAPS, 103, 893-902(2007)

참조

관련 문서

As the results from this study, it proved the usefulness of color psychological counseling through the effect of color stimuli on brain waves to

근래에 연구되는 격자형 모델은 각 경계범위에서 각기 다른 변수의 영향을 정확 하게 산출하지 못하고 있으나 , 수용모델링을 병행하는 경우 높은 정확도를 추정할

둘째, 단순한 지식 전달의 수업이 아닌 학생 스스로의 탐구를 바탕으로 한 교육과 정 재구성을 통해 ‘수업’에 대한 의미를 다시 한 번 생각해보는 계기가

This study tried to examine what mutual relationships there are among preferred colors, temperament types and aptitude types, using color and color psychology, the

As a result of this study, it was confirmed that the possibility of valuable resources recovery was positive when a combined process of froth

We report the fabrication of nano-porous ZnO nanowires (NWs) using a process combining laser-induced hydrothermal growth followed by a post annealing process.. Initially,

NURBS 곡선으로 표현 하였고 파라메트릭 기법을 이용하여 보다 쉽게 형상을 정의할 수 있도록 하였 다 마지막으로 이를 수행할 수 있는 수퍼요트 프로파일

However, in the 0.5wt.% Cu-added steel, stability of retained austenite did not show severe variation against plastic deformation, which was effective to