• 검색 결과가 없습니다.

[PDF] Top 20 Three Dimensional Resistivity Modeling by Serendipity Element

Has 10000 "Three Dimensional Resistivity Modeling by Serendipity Element" found on our website. Below are the top 20 most common "Three Dimensional Resistivity Modeling by Serendipity Element".

Three Dimensional Resistivity Modeling by Serendipity Element

Three Dimensional Resistivity Modeling by Serendipity Element

... 2011 한국지구물리 ․ 물리탐사학회 학술대회 및 정기총회 2011년 10월 6일(목) ~ 7일(금), 한국지질자원연구원 강당동 Serendipity 요소법에 의한 전기비저항 3차원 모델링 이근수 1) , 조인기 1) , 강혜진 1) ... See full document

2

Three-dimensional finite element analysis of platform switched implant

Three-dimensional finite element analysis of platform switched implant

... finite element analysis has been developed since it was first introduced to the dental field, it still has limitations related to reproduction of complex structure, mesh size, boundary conditions, introduction of ... See full document

7

Three-Dimensional Subsurface Resistivity Profile using Electrical Resistance Tomography for Designing Grounding Grid

Three-Dimensional Subsurface Resistivity Profile using Electrical Resistance Tomography for Designing Grounding Grid

... finite element formulation of the ERT problem and iterative Gauss-Newton with regularization to solve the inverse ...the three-dimensional soil resistivity ... See full document

12

Modeling and Analysis of Arbitrarily Shaped Three-Dimensional Cracks

Modeling and Analysis of Arbitrarily Shaped Three-Dimensional Cracks

... 생성), Symmetric Galerkin Boundary Element Method(대칭 Galerkin 경계요소법) 초록: SGBEM-FEM 교호법은 유한 물체 내에 존재하는 삼차원 균열을 해석하는 유용한 방법으로 알려져 있다. 이 방법으로 일반적인 평면 혹은 비평면 삼차원 균열에 대한 정확한 응력강도계수를 구할 수 있다. 기존의 방법에서는 균열을 모델화 하는데 8 절점 ... See full document

7

Three-Dimensional SP Modeling at a Geothermal Reservoir Site

Three-Dimensional SP Modeling at a Geothermal Reservoir Site

... : Three-dimensional (3-D) self-potential (SP) simulation algorithm (3-D SP simulator) has been developed by combining the geothermal simulator PT (Pressure and Temperature) and the 3-D ... See full document

11

Three-Dimensional Time-Domain Elastic Wave Modeling using Finite-Difference Method

Three-Dimensional Time-Domain Elastic Wave Modeling using Finite-Difference Method

... Marfurt, K.J., 1984, “Accuracy of finite-difference and finite-element modeling of the scalar and elastic wave equations,” Geophysics, Vol. 49, pp. 533-549. Min, D.-J. and Kim, H.-S., 2005, “Feasibility of ... See full document

11

Three Dimensional Finite Element Analysis of Kimplant

Three Dimensional Finite Element Analysis of Kimplant

... In this study, the biomechanical characteristics of Kimplant were compared with that of Brånemark implant by using three dimensional finite element analysis.. Two finite element models w[r] ... See full document

9

Structural Analysis of Tunnel Structures by Two and Three Dimensional Modeling

Structural Analysis of Tunnel Structures by Two and Three Dimensional Modeling

... As results of the study, three dimensional analyses of the behavior of tunnel concrete lining structure considering lateral pressure factor shows that the moment [r] ... See full document

6

Static Analysis of Three Dimensional Solid Structure by Finite Element-Transfer Stiffness Coefficent Method Introducing Hexahedral Element

Static Analysis of Three Dimensional Solid Structure by Finite Element-Transfer Stiffness Coefficent Method Introducing Hexahedral Element

... 유한요소법의 취약점을 극복하기 위한 대안으로 저자들은 유한요소-전달강성계수법(finite element- transfer stiffness coefficient method) 2)-4) 을 개발하 여 제안한 바 있다. 이 방법은 유한요소법 연구자들 이 개발한 유한요소를 도입하여 모델링에 이용하고, 강성계수의 전달에 기본 개념을 두고 있는 전달강성 ... See full document

6

A Study on the Utilization of Digital Design by Three Dimensional Modeling

A Study on the Utilization of Digital Design by Three Dimensional Modeling

... third dimensional digital design escapes plan and design process in concept that get presentation result after is completed, establishes role of effective and systematic digital design at planning and design of ... See full document

10

THREE-DIMENSIONAL FINI6E ELEMENT ANALYSIS OF THE ENDOSSEOUS IMPLANT DESIGNS

THREE-DIMENSIONAL FINI6E ELEMENT ANALYSIS OF THE ENDOSSEOUS IMPLANT DESIGNS

... 해면골에서의 최대 응력집중 부위는 임프란트의 하단 의 설측에서 관찰되며 그 수치는 0.200 kg/㎟ 이었다 (Figure 8). Equivalent Stress Distributions at Implant-Bone Interface of Model A.. 치밀골에서의 나사방향에 따른 최대 응력치의 크기는 정방향 일 때 가장 적고 [r] ... See full document

30

Three Dimensional Modeling and Simulation of a Wheel Loader

Three Dimensional Modeling and Simulation of a Wheel Loader

... Fig. 2 Modeling of a bucket, a boom 3. 휠로더의 주행 시뮬레이션 3.1 휠로더 주행 시나리오 휠로더는 무한궤도식 로더와 달리 상대적으로 고속 주행을 하면서 작업을 수행한다. 따라서, 주 행으로 인한 각 조인트 반력을 알아보고자 ADAMS 를 이용하여 휠로더의 주행 시뮬레이션을 수행하였다. ADAMS/View 에서 기본적으로 제공하 는 타이어 정보 ... See full document

5

Three-Dimensional Computational Modeling of Scour around Pile Groups

Three-Dimensional Computational Modeling of Scour around Pile Groups

... 3) 최대 세굴심과 상류말뚝에서 발생한 국부세굴심은 단일말뚝에서 나타난 세굴의 경향과 유사함을 보였 다. 그러나 하류에 위치한 말뚝주변의 세굴은 상류 말뚝의 영향을 받았고 특히 무차원 말뚝간격이 3.75 보다 작은 경우에는 말뚝들 간의 상호영향 때문에 증가한 난류성분 때문에 세굴이 발생하였다. 상류에 위치한 말뚝 세굴심보다 낮았지만[r] ... See full document

13

The Topology Optimization of Three-dimensional Cooling Fins by the Internal Element Connectivity Parameterization Method

The Topology Optimization of Three-dimensional Cooling Fins by the Internal Element Connectivity Parameterization Method

... of three-dimensional cooling fins or heat sinks. Motivated by earlier success of the Internal Element Connectivity Method (I-ECP) method in two- dimensional problems, the extension of ... See full document

6

Three-Dimensional Finite Element Analysis of Forging Processes with Back Pressure Exerted by Spring Force

Three-Dimensional Finite Element Analysis of Forging Processes with Back Pressure Exerted by Spring Force

... exerted by mechanical forces including spring reaction are simulated by three-dimensional finite element ...basic three-dimensional approach extended from ... See full document

4

Optimal Design and Three-Dimensional Thermal Analysis using Finite Element Analysis

Optimal Design and Three-Dimensional Thermal Analysis using Finite Element Analysis

... 1 Low-temperature vacuum blackbody; (a) Schematic design, (b) Cross-sectional structure 는 흑체 내부에 RTD(Resistance Temperature Detectors) 센서를 삽입해서 측정했다... and Hollandt, [r] ... See full document

2

Automatic Generation of Triangular Ginite Element Meshes on Three-Dimensional Surfaces

Automatic Generation of Triangular Ginite Element Meshes on Three-Dimensional Surfaces

... mesh generation. (1 cylindrical surface, 4 planes). Fig. 19. Finite element mesh constructed for a bracket model. (1935 elements, 4158 nodes). 프로그램의 성능을 측정하고자 Fig. 19 의 요소망 생 성에 소요된 시간을 측정해 본 결과 HP 712-60 워크 ... See full document

10

Effect of Implant Preload on the Marginal Bone Stresses Studied by Three Dimensional Finite Element Aanalysis

Effect of Implant Preload on the Marginal Bone Stresses Studied by Three Dimensional Finite Element Aanalysis

... Radial stress distribution across the abutment, implant fixture and bone under an occlusal load of 100N applied at the top surface of abutment at 30 degree with respect to implant axis..[r] ... See full document

12

MAXILLOFACIAL ESTHETICS BY THREE DIMENSIONAL FACIAL MORPHOMETRICS

MAXILLOFACIAL ESTHETICS BY THREE DIMENSIONAL FACIAL MORPHOMETRICS

... 그러나 평균적인 미적 기준치 자체가 일반적인 사람들에게는 좀처럼 발견되어지지 않는 안모이기 때문에 Cox와 Linden 10) 의 지 적처럼 치열교정치료나 외과적 악교정치료에서 기준으로 삼는 수치의 범위가 너무 좁아서 일반인들이 가지고 있는 안모의 다 양성이 반영되어 있지 않다는 것 또한 사실이다. 이는 평균적인 기준치를 수치적으로만 해석하고 전체적인 윤곽이나 3차원적인 형태로 이해하지 못할 ... See full document

7

Three-dimensional finite element analysis of implant-supported crown in fibula bone model

Three-dimensional finite element analysis of implant-supported crown in fibula bone model

... supported by cortical bone in terms of biomechanical view 16 and bone quality and quantity could influence on the stress of osseointegrat- ed ...finite element analysis it was shown that maxi- mum stresses ... See full document

7

Show all 10000 documents...