• 검색 결과가 없습니다.

Methane Reforming with Catalytic Combustion in Micro Heat Exchanger 이승재

N/A
N/A
Info
다운로드
Protected

Academic year: 2022

Share "Methane Reforming with Catalytic Combustion in Micro Heat Exchanger 이승재"

Copied!
1
0
0

로드 중.... (전체 텍스트 보기)

전체 글

(1)

Theories and Applications of Chem. Eng., 2005, Vol. 11, No. 2 2237

화학공학의 이론과 응용 제11권 제2호 2005년

Methane Reforming with Catalytic Combustion in Micro Heat Exchanger 이승재

*

, 정남조, 유인수, 김희연, 강성규, 송광섭

한국에너지기술연구원

([email protected]*)

Micro heat exchanger was built by brazing stainless steel foils with microchannels. One of two flow paths was washcoated with a mixture of Pd/γ-Al2O3 powder and alumina sol for methane combustion. Also, the other flow path was washcoated with Pt/γ-Al2O3powder and alumina sol for methane reforming. This work demonstrates that the heat of methane combustion could be supplied into the highly endothermic reforming reaction.

참조

지금 다운로드하기 ( PDF - 1 페이지 - 349.68 KB )

관련 문서

Modeling for Industrial Heat Exchanger Type Steam ReformerYong Ho Yu

Abstract−−−−In a heat exchanger type steam methane reformer, the temperature profiles and mole fractions along the axial distance from the top of the reformer can be

The Effect of Calcination Temperature on the Performance of Ni-Ce0.8Zr0.2O2 Catalysts for Steam Reforming of Methane under Severe Conditions

개질반응의 종류로는 SRM (steam reforming of methane), POM(partial oxidation of methane), CDR(carbon dioxide reforming of methane), OSRM(oxy-steam reforming of methane), CSCRM

Effects of Novel Fin Shape of High Temperature Heat Exchanger on 1 kW Class Stirling Engine

2 High temperature heat exchanger of Stirling engine for micro CHP; (a) Photograph of the original prototype; (b) Novel design of high temperature heat exchange in

Fabrication and Performance Test of MEMS Catalytic Combustors Using Photosensitive Glass Wafer

Ryi, Jong-Soo Park, Seung-Hoon Choi, Sung-Ho Cho and Sung-Hyun Kim, 2005, “Novel Micro Fuel Processor for PEMFCs with Heat Generation by Catalytic Combustion,”

The Study on the Application of Heat Recovery Aluminium Heat Exchanger in HVAC System

For the purpose of estimating the large volume rotary heat exchanger and cross flow plate heat exchanger in heat recovery ventilator... 이코노마이저가

Methane Engine Combustion Test Facility Construction and Preliminary Tests

Finally, a preliminary hot-firing test was conducted to measure the combustion efficiency, heat flux, and combustion stability of a thrust chamber prototype..

NUMERICAL ANALYSIS TO DESIGN HIGH TEMPERATURE HEAT EXCHANGER OF BETA TYPE STIRLING ENGINE IN 3-D COMBUSTION FIELD

To find the optimal design of heat exchanger in heat transfer capacity numerical calculation is conducted by changing the shape, the number, and material of reference

Low Temperature Methane Steam Reforming for Hydrogen Production for Fuel CellsHyun-Seog Roh

To improve the total efficiency of the reforming section, low temperature methane steam reforming to produce hydrogen for FC has been proposed based on burning both unconverted CH4 and