AL-Scan Ⓡ 을 이용한 술 전 안구생체계측과 백내장 수술 후 굴절력 예측의 정확성
전체 글
수치
![Figure 1. Bland-Altman plot of axial length between AL scan® and IOL master® (A), and A-scan (B) (95% limits of agreement for axial length difference: AL scan® -IOL master® [-0.049, 0.036]; AL scan® - A-scan [0.048, 0.141]).](https://thumb-ap.123doks.com/thumbv2/123dokinfo/5341327.180126/2.892.88.805.780.1066/figure-bland-altman-length-master-limits-agreement-difference.webp)
![Figure 3. Bland-Altman plot of keratometry between AL scan® and IOL master® (A), and Auto refractive keratometry (ARK) (B) (95% limits of agreement for axial length difference: AL scan® -IOL master® [-0.49, 0.41]; AL scan® - ARK [-0.44, 0.38]).](https://thumb-ap.123doks.com/thumbv2/123dokinfo/5341327.180126/4.892.89.804.105.378/figure-bland-altman-keratometry-refractive-keratometry-agreement-difference.webp)
관련 문서
This study compared variation of formula by PCA with that of formula by ACI with variation of column and wall measured in tall buildings, and performed
Thesis submitted in partial fulfillment of the requirements for the degree of Master of Interpretation and Translation.. This thesis has been
A thesis submitted in partial fulfillment of the requirement for the degree of Master of Interpretation and Translation..
A thesis submitted in partial fulfillment of the requirement for the degree of Master of Interpretation and Translation..
Micro- and nano-sized pores were formed on the surface of the alloy using PEO and anodization methods, and the pore shape change according to the Zr
4.14 Comparison of calculated hardness brinell by the model of Venugopalan et al.[8] and measured values from the present study and a literature[5].. 4.15 Comparison
Especially, Mg-Al system alloys are inexpensive and have standard mechanical properties microstructure and deformation behaviorsat high temperature were investigated..
In order to investigate the characteristics of Al/CFRP using friction spot joining, plunge depth, the rotation speed, and the dwell time were selected as parameters..
