Effect of the boundary shape of weld specimen on the stress distribution
전체 글
수치
관련 문서
It is possible to control the welding residual stress and deformation through the finite element analysis using jig free in-situ control technique of welding induced out
Through this analysis, the residual stress of the high tensile steel fillet weld was measured, and the reliability of numerical simulation was secured by
In order to simulate a thermo-mechanical behavior in the vicinity of the deposited region by a LENS process, a finite element (FE) model with a moving heat flux is developed
In order to quantitatively examine the characteristics of the butt welding, the welding quality of the cut section, stain-stress behavior and the hardness of
Evaluating parameters of osseointegrated dental implants using finite element analysis-a two- dimentional comparative study examining the effects of implant
The optimized STL files of the 3D tooth models were imported into the finite element analysis software, CosmosWorks (Structural Research & Analysis
Global structural analysis model of the 300K VLCC by using the developed method. (Shell element, 1-D
à An element of material near the center of the shaft has a low stress and a small moment arm and thus contributes less to the twisting moment than an
