• 검색 결과가 없습니다.

Design optimization of the outlet holes for bone crystal growing with bioactive materials in dental implants: Part II. number and shapes

N/A
N/A
Protected

Academic year: 2021

Share "Design optimization of the outlet holes for bone crystal growing with bioactive materials in dental implants: Part II. number and shapes"

Copied!
5
0
0

로드 중.... (전체 텍스트 보기)

전체 글

Loading

수치

Fig. 3. Type 5-B, Stress Contour Zooming at 4 Outlets (Max. stress = 1.757 MPa, Min. stress = 110 Pa).
Fig. 1 shows various grooves with variations: 3 outlets (0.0942 mm 2 ), 4 outlets (0.1256 mm 2 ), 5 outlets (0.1570 mm 2 )

참조

관련 문서

This study is an analysis of distribution of patient who installed Endopore Ⓡ at maxilla in Chosun University Dental hospital and types of implant for about 4

success rates of dental implants placed at the time of or after alveolar ridge augmentation with an autogenous mandibular bone graft and titanium mesh: a 3-to

Histologic evaluation of early human bone response to different implant surfaces2. Histologic evaluation of human bone integration on machined and

Consequently, the present study was designed to investigate the effect of adding 60 mg of raloxifene hydrochloride daily to women treated with GnRH-a for severe endometriosis

선박기본설계개론, 2006.3 Computer Aided Ship Design 2008 Computer Aided Ship Design 2008 –– PART III: Optimization Methods , 2006.3 PART III:

: Bone response to unloaded titanium implants with a sandblasted and acid-etched surface : A histomorphometric study in the canine mandible.. : Early

These optimum design requirements include: i) a minimum number of tube turns for a PHP operable in top heat mode, ii) the use of R-123 as working fluid with 50 % charging

Calcium metaphosphate(CMP) Bioactive glasses.. 1 Bioactive spectra for various bioceramic implants.. Solubility of calcium phosphate