Limited Open Reduction and Intramedullary Nailing of Proximal Femoral Shaft Fracture
전체 글
수치
관련 문서
3.7 Fracture interface after tensile shear test with plunge depth 43 Table.. 3.13 Fracture interface after tensile shear test with dwell time
“ᄃ” shaped member due to brittle fracture with transverse shear and laminar bending. Members with 90 degree stacking is collapsed in crush mode due to
Through this result, it was confirmed that brittle fracture did not occur in high Mn steel and ductile fracture occurred in spite of cryogenic
The clinical outcome and complication for treating proximal femoral shaft fracture were compared and analyzed through the group treated with closed
This study investigated the loading rate effect on the fracture resistance under cyclic loading conditions to clearly understand the fracture behavior of
82 year-old female patient with traffic accident, (A,B,C) Initial x-rays show open fracture of left distal femur(AO 33-C3, Gustilo-Anderson II) with patella
à An element of material near the center of the shaft has a low stress and a small moment arm and thus contributes less to the twisting moment than an
Figure 8.1 A propane tank truck explosion due to fracture from initial cracks in