3D Finite Element-based Study on Skin-pass Rolling - Part I : Finite Element Analysis

It is possible to control the welding residual stress and deformation through the finite element analysis using jig free in-situ control technique of welding induced out

In order to simulate a thermo-mechanical behavior in the vicinity of the deposited region by a LENS process, a finite element (FE) model with a moving heat flux is developed

Evaluating parameters of osseointegrated dental implants using finite element analysis-a two- dimentional comparative study examining the effects of implant

The optimized STL files of the 3D tooth models were imported into the finite element analysis software, CosmosWorks (Structural Research & Analysis

2. The finite element is calculating using tension test of uni-direction 0° and 90°, compression test of uni-direction 0° and 90° and shear test results and, the results

Global structural analysis model of the 300K VLCC by using the developed method. (Shell element, 1-D

Although the nodal value for displacement coincides with the exact solution, the values between nodes are very inaccuracy in the case of using few elements due to using

– Step 3: substitute the element trial solution into integrals (LHS) – Step 4: Develop specific expression for the element trial