Application of Ultrasonic Nano Crystal Surface Modification into Nitinol Stent Wire to Improve Mechanical Characteristics
전체 글
수치
관련 문서
1 John Owen, Justification by Faith Alone, in The Works of John Owen, ed. John Bolt, trans. Scott Clark, "Do This and Live: Christ's Active Obedience as the
Micro- and nano-sized pores were formed on the surface of the alloy using PEO and anodization methods, and the pore shape change according to the Zr
Although a large compressive residual stress was generated in the surface layer due to the peening process, shot peening showed –23 MPa, unlike laser... shock peening
Conventional ECP is a non-contact surface polishing method used to improve surface quality without leaving the mechanical scratch marks often encountered
The purpose of this study was to evaluate surface changes and abrasion of the implant fixture and TiN coated abutment screw after repeated delivery and
Comparison of the monthly average difference between surface temperature and sea surface temperature at Chilbaldo on foggy(f_avg) and no foggy(nf_avg) day cases from
They suggested that vaporization of a thin layer of liquid between the growing bubble and the heating surface caused removal of heat from the surface, thus lowing
Effect of pain control and improve function of knee joint applied to osteoarthritis by carbon surface-heating... Diagram of