• 검색 결과가 없습니다.

(1)The distinct advantage of the syringe pump flow rate with very low pulsation

N/A
N/A
Protected

Academic year: 2022

Share "(1)The distinct advantage of the syringe pump flow rate with very low pulsation"

Copied!
1
0
0

로드 중.... (전체 텍스트 보기)

전체 글

(1)

The distinct advantage of the syringe pump

flow rate with very low pulsation. The model 8522 Syringe Pump can be used for for which

Model L.TEX 8522 Syringe Pump Delivery system

Volume

Setting flow rate range Max. Pressure

Main functions

External control Dimensions

*Specifications

2nd Silk Road Heights, 1721 Katakura URL: http://l

Tel: +81

The distinct advantage of the syringe pump

flow rate with very low pulsation. The model 8522 Syringe Pump can be used for for which precise flow rate

Model L.TEX 8522 Syringe Pump Delivery system

olume of cylin

Setting flow rate range Max. Pressure

Main functions

External control Dimensions and w

*Specifications

2nd Silk Road Heights, 1721 Katakura URL: http://l-tex.net/english/

Tel: +81-90-4452

The distinct advantage of the syringe pump

flow rate with very low pulsation. The model 8522 Syringe Pump can be used for precise flow rate

Model L.TEX 8522 Syringe Pump Delivery system

of cylinder

Setting flow rate range Max. Pressure

Main functions

External control

and weight

*Specifications and appearance

2nd Silk Road Heights, 1721 Katakura tex.net/english/

4452-7824 Email: [email protected]

The distinct advantage of the syringe pump

flow rate with very low pulsation. The model 8522 Syringe Pump can be used for precise flow rate and low pulsation

Model L.TEX 8522 Syringe Pump

and appearance are subject to

2nd Silk Road Heights, 1721 Katakura-cho, Hachioji tex.net/english/

7824 Email: [email protected]

The distinct advantage of the syringe pump

flow rate with very low pulsation. The model 8522 Syringe Pump can be used for low pulsation

Model L.TEX 8522 Syringe Pump Specifications

are subject to

cho, Hachioji 7824 Email: [email protected]

is that the pump is able to deliver mobile phase at low flow rate with very low pulsation. The model 8522 Syringe Pump can be used for

low pulsation are required

Specifications

Syringe with a ball screw 15ml

0.01µl~1.0 30MPa

Constant flow and constant pressure mode, time program

pump off timer

External START/STOP, RS 210(W) x

are subject to change without any prior notic

cho, Hachioji-shi, Tokyo 192 net.ne.jp

is that the pump is able to deliver mobile phase at low flow rate with very low pulsation. The model 8522 Syringe Pump can be used for

are required and deliver

Syringe with a ball screw

1.0ml/min

onstant flow and constant pressure mode, time program (stepwise), upper and lower pressure limiter, pump off timer

External START/STOP, RS (W) x 460(H) x

change without any prior notic

shi, Tokyo 192-0914 Japan

is that the pump is able to deliver mobile phase at low flow rate with very low pulsation. The model 8522 Syringe Pump can be used for

and delivering high viscosity solvents.

Syringe with a ball screw

onstant flow and constant pressure mode, time (stepwise), upper and lower pressure limiter,

External START/STOP, RS-232 (H) x 350(D)mm

change without any prior notic

0914 Japan

is that the pump is able to deliver mobile phase at low flow rate with very low pulsation. The model 8522 Syringe Pump can be used for delivering solvent

high viscosity solvents.

onstant flow and constant pressure mode, time (stepwise), upper and lower pressure limiter,

232

(D)mm, approx.. 10

change without any prior notice.

is that the pump is able to deliver mobile phase at low delivering solvent high viscosity solvents.

onstant flow and constant pressure mode, time (stepwise), upper and lower pressure limiter,

. 10kg

20120606

is that the pump is able to deliver mobile phase at low delivering solvent high viscosity solvents.

onstant flow and constant pressure mode, time (stepwise), upper and lower pressure limiter,

20120606-1

참조

관련 문서

In combination with the LDV measurements of internal flow and the limiting streamline observations, we have made clear the internal flow structure of the contra-rotating

This would be the actual volume flow rate that you could observe if the pipework after the compressor was transparent and you measure the actual flow rate under

(4) The effect of the air volume in the air chamber V a on the pressure holding time during lifting operation Δt in the valve chamber is more significant at lower

The total pressure loss coefficient (ζ) is observed to increase with increase in absolute flow angle at U-bend inlet for both RCV1 and RCV2, though the rate of increase is

(2) At stator outlet for design flow rate, the values of axial velocity and the total pressure decrease between near the suction surface of the blade and the hub surface

The deposition temperature of the sputter chamber was kept constant at 350°C, the power supplied to the chamber was 75 W, the oxygen flow rate was changed to 10 sccm and 20

plasma parameters, plasma chemistry, gas pressure, flow rate & temperature.. (2) Directionality by

In keypad control mode, following parameters can be set: pump displays speed or flow rate, pump state when power on (stop or run), automatic keypad lock and simple