Standard Features
• Programmable control system with touch screen
• Screw speed tachometer
• Running time recorder
• Alarm system (visual and audible)
• Two pressure blow air
• High and low plastifier temperature alarms
• Cycle time indicator
• Preform hot water manifold
• Blow mold cooling manifold
• Choice of plastifier screws:
General purpose for PE, PS and PP or special screws for PVC, PP and PET
• Laser Electric preform detector
• Current ANSI/EC safety standards
• Ceramic heater bands
• Integrated heat controls
• Resettable cycle counter
• Retains 30 sets of process parameters
• Electronically controlled injection pressure and screw speed
• Two pressure preform injection
• Internal and external cooling
Options
• Bottle Orientating Stripper System (B.O.S.S.)
• BOSS plus with vacuum
• Machine color finishes to customer specification
• Rotary Union for core rod temperature control
• WYE Delta electric motor start
• 400PSI second blow air pressure
• Outboard cylinder reducing pressure (for smaller molds)
• Automatic air system drain
• One year spare parts kit
• Non split nozzle
• Barrel fan cooling
• Air intensifiers
• HEPA filters
115 East Parkway Drive
Egg Harbor Township, NJ 08234 USA Website: http://www.jomarcorp.com Email: info@jomarcorp.com
Model 40 Injection Blow Molding
Machine Dimensions
Length 107" 272 cm
Width 71" 190 cm
Height with 1.375" (35 mm) 30:1 Vertical Screw 108" 275 cm Height with 2.0" (50.8 mm) 30:1 Vertical Screw 125" 318 cm
Installed Weight 10,400lbs 4,717kg
General Specifications
Preform Clamp 38.2 US tons 34.6 metric tons
Casting Area1 21.8 ins² 141 cm²
13.9 ins² 90 cm²
Blow Mold Clamp 6.6 US tons 4 metric tons
Shut Height 8.00" 203 mm
Press Stroke 4.00" 102 mm
Maxmum Die Set (W x L) 15.50" x 20.00" 394 mm x 508 mm
Max Trigger Bar Length* 17.00" 432 mm
Max Swing Radius 22.28" 566 mm
Shot Capacity 90 gr. (HDPE) with a 1.375" (35 mm) diameter 30:1 L/D Vertical Screw 180 gr. (HDPE) with a 2.00" (50.8 mm) diameter 30:1 L/D Vertical Screw
75 gr. (PVC) with a 1.375" (35 mm) diameter 30:1 L/D Vertical Screw 150 gr. (PVC) with a 2.00" (50.8 mm) diameter 30:1 L/D Vertical Screw
Motor Size Standard 50 hp (37kw)
Recommended Power Service 200 amps @ 380V - 460V, 3 phase, 50 - 60 hz
1 For Standard resins LDPE, HDPE, PP etc use the larger area, For Engineering resins PC, PVC, PET, etc use the smaller casting area
* For information on available trigger bar lengths please contact Jomar
US Metric
US Metric
Electrical Data
in / mm L:D gram 3Ø HZ HP HP KW FLA KW AMPs KW KW AMPS VAC AMPS
1 3/8 / 35 30:1 90 415 50 50 40 30 64 15 36 45 27 100 415 @ 200 2 / 50.8 30:1 180 415 50 50 40 30 64 21 51 51 31 114 415 @ 200 1 3/8 / 35 30:1 90 460 60 50 50 37 65 15 33 52 31 98 460 @ 200 2 / 50.8 30:1 180 460 60 50 50 37 65 21 46 58 35 111 460 @ 200
VOLTS MAX AVERAGE MAX MINIMUM
PLASTIFIER SPECS AC ACTUAL MOTOR MAX. HEAT MACH RUNNING MACH SERVICE
THE TECHNICAL DATA IS NOT BINDING AND MAY CHANGE WITHOUT NOTICE.
