• 검색 결과가 없습니다.

A Study on the Practical Finite Element Modeling Method for Ring Rolling

N/A
N/A
Protected

Academic year: 2021

Share "A Study on the Practical Finite Element Modeling Method for Ring Rolling"

Copied!
6
0
0

로드 중.... (전체 텍스트 보기)

전체 글

Loading

수치

Fig. 2 Dimension of expanding ring specimen
Table 1 Boundary condition of stepped model  Substep-1  Substep-2  U1  U2  UR3  U1  U2  UR3  Mandrel  0  v feed 0  0
Fig.  5  Time-historical  interpolation  of  discretized  time  point result data
Fig.  9  Comparison  of  radial  equivalent  plastic  strain  distribution result of case 1

참조

관련 문서

1 John Owen, Justification by Faith Alone, in The Works of John Owen, ed. John Bolt, trans. Scott Clark, "Do This and Live: Christ's Active Obedience as the

Although the coastal area of Jeju has already been developed, it has high pressure and demands for development continually increasing due to the increase

this study analysed cast speed and solidification in thermal and flow perspectives and based on the results, conducted a confidence test on the high-speed general purpose

12 As such, using finite element modeling, the effect of stress distribution around the internal non-submerged type implants on marginal bone resorption

Therefore, as a recovery method during exercise, it is more effective for recovery of exercise fatigue and prevention of body acidification due to high

ƒ Monosaccharide may be present in the form of Monosaccharide may be present in the form of a linear or ring structure. ƒ In solution it is in the form of

 Euler buckling strength of long column cannot be improved by higher- strength material since it is due to the instability of the column as a whole.  For a column

출처 : IAEA 발표 자료(Comprehensive inspection exercise at bulk handling facilities, “U-235 Enrichment measurements by gamma-ray spectroscopy”) 13.  Uranium