소아 상완골 외과 골절의 수술적 치료 결과
전체 글
수치
관련 문서
3.7 Fracture interface after tensile shear test with plunge depth 43 Table.. 3.13 Fracture interface after tensile shear test with dwell time
An evaluation of marginal fit of three-unit fixed dental prostheses fabricated by direct metal laser sintering system.. Marginal accuracy and fracture strength
Through this result, it was confirmed that brittle fracture did not occur in high Mn steel and ductile fracture occurred in spite of cryogenic
Purpose: Calcaneal fracture is a rare fracture, which accounts for about 2% of all fractures, but is one of the most common fractures in the ankle bone.. There is
This study investigated the loading rate effect on the fracture resistance under cyclic loading conditions to clearly understand the fracture behavior of
XAFS: X-ray absorption fine structure XES: X-ray emission spectroscopy XRF: X-ray fluorescence.. Use of x-rays; a probe based
Also, the quasi-infraversion is larger for the inferior safe insertion limit direction (Fig. In practical design of a screw guiding device, targeted safe angles can
82 year-old female patient with traffic accident, (A,B,C) Initial x-rays show open fracture of left distal femur(AO 33-C3, Gustilo-Anderson II) with patella