• 검색 결과가 없습니다.

ST56 ( M ) EL-APL

N/A
N/A
Protected

Academic year: 2022

Share "ST56 ( M ) EL-APL"

Copied!
2
0
0

로드 중.... (전체 텍스트 보기)

전체 글

(1)

ST56(M )EL-A PL Ф

전력선 제어

56mm

LED 타워램프

AC POWER LINE LED TOWER LAMP

외형도(External View Drawing)

ST56MEL ST56EL

방식으로 상용전원 망을 이용하여

AC Power line communication AC

데이터를 주고받는 통신 시스템을 이용한 타워램프입니다.

이내의 근거리에서는 별도의 시그널 케이블이 필요 없이 전원 50m

케이블 만으로도 시그널 타워램프의 컨트롤이 가능합니다.

별도의 모뎀장치를 통해 상용 전원 선로에 실린 시그널만 걸러내어

타워램프 컨트롤러에 RS485통신 방식으로 신호를 전달하고 타워램프, 컨트롤러는 이 신호를 받아서 LED Driver와 Sound회로에 보낼 신호를 발생시킵니다.

최대 5가지 단 의(5 ) LED 신호빛과 용도에 알맞은 신호음을 선택할 수

있습니다.

신호음의 종류

ST56EL-APLB/ST56MEL-APLB :부저음 Buzzer Sound (90dB/1m) ST56EL-APLS/ST56MEL-APLS : 경고음 멜로디 음성신호, , (85dB/1m) Warning Sound, Warning Melody, Voice Signal (85dB/1m)

점멸수(Flashes) : 60-80/min.(점멸형의 경우 Flashing Type)

재질(Material) : 그로브(Globe)-AS, 몸체(Body)-ABS, Pole-Al

보호등급(Protection Class) : IP44(일반형 Normal Type)

부저 신호음 내장형

IP23( / Buzzer/Sound Signal Built-in Type)

별도의 시그널 케이블이 필요 없이 전원케이블 만으로 제어가 가능한 전력선 제어 시그널 타워램프

AC Power Line Controlling LED Tower Lamp which can be controlled by AC power line only without separate signal line.

LED tower lamp of AC power line communication type using

a communication system which send and receive a data through existing normal AC power line.

Possible to control the signal tower lamp only by power line

without separate signal line in local area(within 50m distance).

The signal on power line is filtered by a separate modem and

is transmitted to the tower lamp controller by RS485

communication system. Then the tower lamp controller create a signal to be sent to LED Driver and Sound Circuit.

⁃ Possible to select suitable sound signal and 5 colors of LED light as maximum.

개념도(Concept Diagram)

ST56EL-APLB Pole 취부 부저음 내장형

Pole Mounting/Buzzer Built-in Type ST56EL-APLS Pole 취부 신호음 내장형 Pole Mounting/Sound Built-in Type

ST56MEL-APLB 직부 부저음 내장형 Direct Mounting/Buzzer Built-in Type ST56MEL-APLS 직부 신호음 내장형 Direct Mounting/Sound Built-in Type

(2)

사양(Specification)

모델(Model) 항목(Item) 세부사양(Description)

ST56EL-APLB ST56MEL-APLB

피에조 부저 내장형

Piezo Buzzer Built-in Type

타워램프 (Tower Lamp)

단수(Layer) : 1~5

전압(Voltage) : DC12V

전류(Current) : 0.27A

색상(Color) :적색(R) 황색(A) 녹색(G) 청색(B) 백색(W)

부저(Buzzer) ⁃ 전압 전류/ (Voltage/Current) : 24V/20mA 음량(Volume) : 90dB/1m

신호(Signa)l ⁃ 전력선 통신 용 모뎀 (RS485 Pin to Pin)

Modem for AC Power Line Communication (RS485 Pin to Pin)

케이블(Cable) ⁃ Power & Signal

플러그 몰딩 형

AC 220V-2m, 2W, 0.70㎟, (Plug Molding Type)

전원 공급방식 (Power Supply)

방식 AC-DC Convert : SMPS, Fly back (Type)

Input : AC 85V~265V/240mA

Output : DC 12V/600mA, Max 700mA

전력선 통신용 모뎀전원

Supply : LED lamp power, Piezo buzzer power, (AC power line communication modem power)

DC-DC Convert : Linear Regulator

Input : DC 12V Output : DC 5V/500mA

전력선 통신 모뎀용 전원

Supply : (AC power line communication modem power, Controller power

ST56EL-APLS ST56MEL-APLS

사운드 스피커 내장형

Sound Speaker Built-in Type

타워램프 (Tower Lamp)

단수(Layer) : 1~5

전압(Voltage) : DC24V

전류(Current) : 0.27A

색상(Color) :적색(R) 황색(A) 녹색(G) 청색(B) 백색(W)

스피커 (Sound Speaker)

정격

Speaker (Rated Voltage) : 1W

전압 전류/ (Voltage/Current) :12V/85mA

음량(Volume) : 85dB/1m

마이크로 칩 오디오앰프 및 스피커 형식의 음 발생 장치 내장,

(Device of sound output such as microchip, audio amplifier and speaker type are built-in)

신호(Signal) ⁃ 전력선 통신 용 모뎀(Modem for AC power line communication) : RS485 Pin to Pin

전원 공급방식 (Power Supply)

방식 AC-DC Convert : SMPS, Fly back (Type)

Input : AC 85[V]~265[V]/240[mA]

Output : DC 12[V]/600[mA], Max 700[mA]

전력선 통신용 모뎀전원

Supply : LED Lamp power, Piezo buzzer power, (AC power line communication modem power), Controller power

DC-DC Convert : Linear Regulator

Input : DC 12[V]

Output : DC 5[V]/500[mA]

전력선 통신 모뎀용 전원

Supply : (AC power line communication modem power), Controller power, Sound amplifier power

회로(Circuit)

참조

관련 문서

In this work, first the “Exclusion zone” for each satellite signal has been defined and then by using some experiments the effects of different parameters like signal

The results show that the behavior of current collection performance were analysis from currents of overhead contact line in AC electric railway system..

It employs three-issue VLIW architecture, and the major low-power and high- performance techniques include: (1) an optimized register-file architecture friendly

Sensitivity and specificity of the LAMP assay in 50 duck carcass swab samples enriched in BPW for 6 h were 96% and 84%, respectively, indicating that the LAMP assay is a

In this paper, we propose the efficient impulsive noise mitigation scheme for power line communication (PLC) systems in smart grid applications.. The proposed scheme

청주대학교 융합전자공학부 전자공학전공

• GPIO 핀을 제어함으로써 별도의 장치 없이 외부 전자장치와 연결하여

프로세스 그룹 ID가 pid인 모든 프로세스들에게