• 검색 결과가 없습니다.

Weight Reduction Design for a JIB of Deck Crane for Shipment

N/A
N/A
Protected

Academic year: 2021

Share "Weight Reduction Design for a JIB of Deck Crane for Shipment"

Copied!
5
0
0

로드 중.... (전체 텍스트 보기)

전체 글

Loading

수치

Fig. 3 Load and boundary condition of JIB
Fig. 4 Equivalent stress distribution with respect to  the luffing angle of JIB
Fig. 6 Design variables of JIB

참조

관련 문서

A frame size error in a frame that could alter the state of the entire connection MUST be treated as a connection error (Section 5.4.1); this includes any frame carrying a

The “Asset Allocation” portfolio assumes the following weights: 25% in the S&P 500, 10% in the Russell 2000, 15% in the MSCI EAFE, 5% in the MSCI EME, 25% in the

1 John Owen, Justification by Faith Alone, in The Works of John Owen, ed. John Bolt, trans. Scott Clark, "Do This and Live: Christ's Active Obedience as the

The design method for the optimization of FRP leaf spring is proposed by applying design method of experiment in order to improve the characteristics of

Jib crane 이 이 탑재된 탑재된 단동선 단동선 – – 하역장치 하역장치 제작 제작. 크레인

The purpose of this study is to establish and design the characteristics of summer resorts according to the design manual, develop cultural products using

: A structural steel bulk weight factor of 47% of total topsides weight (i.e. equipment + bulks + structural) has been used for integrated deck areas, and : 50% of total

Because of the smooth characteristics of the raised cosine spectrum, it is possible to design practical filters for the transmitter and the receiver that approximate