• 검색 결과가 없습니다.

The influence of occlusal loads on stress distribution of cervical composite resin restorations: A three-dimensional finite element study

N/A
N/A
Protected

Academic year: 2021

Share "The influence of occlusal loads on stress distribution of cervical composite resin restorations: A three-dimensional finite element study"

Copied!
12
0
0

로드 중.... (전체 텍스트 보기)

전체 글

Loading

수치

Figure 1. Disassembled  3D  FE  model:  (a)  cancellous  bone,  (b)  cortical  bone, (c) periodontal ligament, (d) dentin, (e) pulp, (f) enamel, (g) composite resin.
Table  1. Mechanical properties of the tooth and supporting structures used in the study
Figure 4.  The maximum principal stress distribution of Z100 under various loading conditions.
Figure 5.  The maximum principal stress distribution of Tetric Flow under various loading conditions.
+2

참조

관련 문서

The influence of surface conditioning on the shear bond strength of self-adhesive resin cement to zirconia ceramics.. Zirconia as a

This study was performed to confirm the effect of the stress distribution on short implant supporting bone according to horizontal bone loss using a three-dimensional

12 As such, using finite element modeling, the effect of stress distribution around the internal non-submerged type implants on marginal bone resorption

A Study on the Development of Ship’s Ballast Water A Study on the Development of Ship’s Ballast Water A Study on the Development of Ship’s Ballast Water A Study on the

The effect of flowable resin composite on microleakage and internal voids in class II composite restorations.. Roberts HW, Charlton DG,

근래에 연구되는 격자형 모델은 각 경계범위에서 각기 다른 변수의 영향을 정확 하게 산출하지 못하고 있으나 , 수용모델링을 병행하는 경우 높은 정확도를 추정할

à An element of material near the center of the shaft has a low stress and a small moment arm and thus contributes less to the twisting moment than an

Secondly, in the results of the analysis as to the influence of the Taekowndo leader's leadership on the stress of a Taekowndo player, it appeared that in