The influence of various core designs on stress distribution in the veneered zirconia crown: a finite element analysis study
전체 글
수치
관련 문서
1 John Owen, Justification by Faith Alone, in The Works of John Owen, ed. John Bolt, trans. Scott Clark, "Do This and Live: Christ's Active Obedience as the
In this study, the finite element analysis was used to predict and obtain the material properties of the carbon fibers and the resin even if the carbon fiber laminate and the
Although a large compressive residual stress was generated in the surface layer due to the peening process, shot peening showed –23 MPa, unlike laser... shock peening
This study was performed to confirm the effect of the stress distribution on short implant supporting bone according to horizontal bone loss using a three-dimensional
12 As such, using finite element modeling, the effect of stress distribution around the internal non-submerged type implants on marginal bone resorption
Through this analysis, the residual stress of the high tensile steel fillet weld was measured, and the reliability of numerical simulation was secured by
However, in respect to relation conflict stress and response in tree test, the taller trees, the thicker the stalks and the larger the crown, the
A stress component is positive when it acts in the positive direction of the coordinate axes, and on a plane whose outer normal points in one of the positive coordinate