Study of Forming Properties for an Edge Thickening Model Using the Finite Element Method
전체 글
관련 문서
It is possible to control the welding residual stress and deformation through the finite element analysis using jig free in-situ control technique of welding induced out
In order to simulate a thermo-mechanical behavior in the vicinity of the deposited region by a LENS process, a finite element (FE) model with a moving heat flux is developed
Evaluating parameters of osseointegrated dental implants using finite element analysis-a two- dimentional comparative study examining the effects of implant
The optimized STL files of the 3D tooth models were imported into the finite element analysis software, CosmosWorks (Structural Research & Analysis
2. The finite element is calculating using tension test of uni-direction 0° and 90°, compression test of uni-direction 0° and 90° and shear test results and, the results
Global structural analysis model of the 300K VLCC by using the developed method. (Shell element, 1-D
Although the nodal value for displacement coincides with the exact solution, the values between nodes are very inaccuracy in the case of using few elements due to using
In this study, Ply can be stacked on Different to predict the strength and stiffness using the fiber and Matrix properties obtained from