Influence of zirconia and titanium fixture materials on stress distribution in abutment screws: a three-dimensional finite element analysis
전체 글
수치
관련 문서
It is possible to control the welding residual stress and deformation through the finite element analysis using jig free in-situ control technique of welding induced out
A clinical study of the efficacy of gold-tite square abutment screws in cement-retained implant restorations.. An abutment screw loosening study of a Diamond
Evaluating parameters of osseointegrated dental implants using finite element analysis-a two- dimentional comparative study examining the effects of implant
The optimized STL files of the 3D tooth models were imported into the finite element analysis software, CosmosWorks (Structural Research & Analysis
This study is an analysis of distribution of patient who installed Endopore Ⓡ at maxilla in Chosun University Dental hospital and types of implant for about 4
success rates of dental implants placed at the time of or after alveolar ridge augmentation with an autogenous mandibular bone graft and titanium mesh: a 3-to
à An element of material near the center of the shaft has a low stress and a small moment arm and thus contributes less to the twisting moment than an
: Bone response to unloaded titanium implants with a sandblasted and acid-etched surface : A histomorphometric study in the canine mandible.. : Early