Function Test Specials Backplane/Rack Test
Cable Test
The New Standard - Efficient, Innovative, Modular, Unique
W 443
W 443-08.07-E-A4
www.weetech.de W 443
Testing and Measuring Performance
· Lower bound 1 Ohm, ± (1 % + 0.5 Ohms)
· Four Terminal Measurement down to 3 mOhms ± (1 % + 0.3 mOhms)
· Programmable current sources up to 3 A
· Upper limit typically 10 GOhms ± 3 %, up to 500 MOhms ± 1 %
· 2,250 Vdc /1,500 Vac (option HV AC) programmable with 12-bit resolution
· ARC detection with unique voltage and slew rate recognition
· Capacitance from 10 pF to 10 nF (option RLC required)
· Checks pair inversion and shield integrity
· Resistors from 3 mOhms to 10 MOhms ± (1 % + 0.3 mOhms) with Four Terminal Measurement
· Capacitance from 20 nF to 10,000 μF, ± (2 % + 2 nF)
· Diodes and Zener diodes
· Transistors
· Capacitance from 10 pF to 1 μF ± (1 % + 2 pF), 1 μF to 10,000 μF ± 2 % (option RLC required)
· Inductances from 1 μH to 1 H ± (2 %) (option RLC required)
· Supply of the UUT with programmable voltages up to 30 Vac / 60 Vdc
· Emulation of the switching processes
· Voltage measurement 0 to (±) 500 V, frequency DC to 1 kHz
· Reproduction of the functional environment, e.g. by electronic loads, frequencies etc.
· Functional test of push buttons and switches
· Import of characteristic curves of external devices and display/interpretation by IVIS 5 software
· Programmable resolution from 1.25 μs to 327 ms (option RLC)
· Max. 32,768 samples Insulation and Hi-Pot Test
Twisted-Pair and Shield Test Component Test
ElectroEmulation Test
Time-/Pulse Measurement Continuity Test
Switching Matrix
· Versions for voltages up to 2,250 Vdc /1,500 Vac
· Various output connectors available
· Power modules for voltages up to 30 Vac / 60 Vdc, current up to 5 A Modules for Electro Emulation Test
Modules for Wiring Test
· Parallel interface with input for control computer
· Control interface (optional) to trigger external devices, e.g. feeders and fixtures
· Software-controlled integration of external devices via IEEE 488/GPIB, RS 232, PC-Bus, CAN-Bus, CANOPEN-Bus, K-Line
· Integration into customer specific ERP-Systems
· Remote control with handheld-PC (Wireless LAN) or via TCP/IP
· Portable 19 inch enclosure
· W 443-2: 5 U or W 443-3: 9 U
· 100 - 230 Vac / 50 – 60 Hz, max. 750 VA Dimension and Weight
Power Supply Interfaces
Further Details
The W 443 enables high-end test features at a value price for the test of safety-related cable harnesses in the aerospace, transportation and automotive industries. As a result of the cle- ver combination of powerful measurement technology, constant current sources up to 3 A and high voltage sources up to 2,250 Vdc, the W 443 can be used without any restriction for high voltage test stations according to EN 50191.
Typical values, valid at the front panel of the tester without adaptation at 25° C and a relative humidity less than 60 %