The structure optimization of a lock nut

And to optimize optical structure, for design variables were selected, larger-the-better characteristics were considered using results of S/N ratio and orthogonal array L 9 (3

본 논문에서는 모듈의 고집적화 및 소형화 에 따라 발 생하는 발열에 따른 성능 저하를 방지하기 위하여 기존 의 플립칩에서의 발열 특성을 분석하였고, 발열 문제를

In this study, the shaft shape of a frequently used M8 blind rivet nut is optimized based on 3D numerical analysis of the blind rivet nut considering

Various dissociation curves are graphed by calculating the binding energy,

일반적으로 대형 5축 복합가공기의 설계는 구조물의 복잡성 등 으로 인해 공작기계의 개발 및 설계 시 숙련자의 경험에 의존하여 개발이 이루어지고 있으며 , 이는 강성

Therefore, a stress-strain curve and a normal distribution of stress-thickness can be obtained and optimization could be obtained for the shape of the stress and strain on the

An optimum design with a verification example for determined location of minimum principal stress have been presented in a two dimensional Block member on elastic foundation

In this study, the generation of the local plastic deformation was predicted when the tube was hooked up to a pneumatic fitting in order to disperse the