Coronary Artery Axial Plaque Stress and its Relationship With Lesion Geometry: Application of Computational Fluid Dynamics to Coronary CT Angiography

To visualize the vari- ation in various transport characteristics (the non-dimen- sional axial velocity and temperature distributions, pressure gradient, rate of heat

(Saturated zone is the zone in which the voids in the soil and rocks are filled with water at a pressure greater than atmospheric pressure).. (Unsaturated zone is the zone

• Under the assumption of equilibrium conditions, and knowing the composition of the fluid stream coming into the separator and the working pressure and temperature

: The size of the opening in the choke determines the flow rate, because the pressure upstream is determined primarily by the well FTP, and the pressure downstream

– Free Body Diagram : isolate half of the shell & fluid Free Body Diagram : isolate half of the shell & fluid – Tensile stress (σ) in the wall & fluid

→ The simulation of turbulence in heat and mass transport models is always important because the scalar transport equation does not contain any pressure gradient

First, computational fluid dynamics(CFD) analysis were used to predict the heat transfer and pressure drop characteristics of each plate heat exchanger with snake

And then, we inspected the effectiveness of the TODWVG through a performance comparison between the TIDWVG(toe- in and delta winglet-type vortex generator)