• 검색 결과가 없습니다.

3D porous ceramic scaffolds prepared by the combination of bone cement reaction and rapid prototyping system

N/A
N/A
Protected

Academic year: 2021

Share "3D porous ceramic scaffolds prepared by the combination of bone cement reaction and rapid prototyping system"

Copied!
1
0
0

로드 중.... (전체 텍스트 보기)

전체 글

Loading

참조

관련 문서

The solidification process of metal alloy was expressed by the change of solid fraction, and the solid fraction was controlled by varying size and

The porous PCL scaffolds produced from the gas foaming and salt leaching and plasma surface treatment are suitable for potential applications in bone

In the heating method by line heating, the initial properties of steel are changed by variables such as temperature, time, and speed. The experimental data

The mechanical properties of the Ir-based films by the change of the alloy element content show that the hardness value is decreased with Re contents

The structure and film optical properties were investigated by X-ray diffraction(XRD), the particle size and thickness were investigated by scanning

Summerscales, "An investigation into the effects of fabric architecture on the processing and properties of fibre reinforced composites produced by resin

Photoluminescence properties and surface morphologies of porous silicon were investigated by controlling of etching times and applied current densities..

Control of Mechanical Properties by Proper Heat Treatment in Iron-Carbon