• 검색 결과가 없습니다.

Verification using the Numerical Analysis of the pressure sensor membrane stress distribution

N/A
N/A
Protected

Academic year: 2021

Share "Verification using the Numerical Analysis of the pressure sensor membrane stress distribution"

Copied!
2
0
0

로드 중.... (전체 텍스트 보기)

전체 글

Loading

수치

Fig. 2 Complete measurement setup
Fig. 4 Stress distribution of Thickness 0.2mm

참조

관련 문서

This study analyses axis-direction velocity distribution, 2nd flowing distribution, shearing stress distribution, pressure distribution, and kinetic energy

그럼에도 불구하고 금속 및 합금의 형태로 활용할 수 있는 것은 그 산 화물이 금속 표면에만 얇게 형성되어 재료의 기계적 특성에 영향을 끼치지 않으면 서 내부의

앞서 언급한 바와 같이 간섭계를 통과한(또는 반사한)4가지 종류의 빛(Fi g.6) 의 세기는 입사된 빛의 파장 (λ) 과 간섭계를 구성하는 공진기(Cavi ty)의 길이 () 에

This study was performed to confirm the effect of the stress distribution on short implant supporting bone according to horizontal bone loss using a three-dimensional

12 As such, using finite element modeling, the effect of stress distribution around the internal non-submerged type implants on marginal bone resorption

under the transient condition using the Lock-in infrared thermography and predict the stress value and the dynamic stress concentration factor based on the

Through this analysis, the residual stress of the high tensile steel fillet weld was measured, and the reliability of numerical simulation was secured by

○ 회전원판에 부착된 영구자석의 개수가 증가할수록 그리고 자석의 극 배치가 N-S 교대로 배치될 때 금속 고정판에 더 많은 열이 발생하여 온도상 승 속도와 폭이 더